Eze-Erect Sign Post Systems
Eze-Erect signposts design permits quick and easy installations from ground level with simple tools. The base posts are readily driven into hard soils, even asphalt. The signpost is then attached with the sign already in place. Crews are quickly trained and most installations take only minutes.
Eze-Erect sign posts’ connection develops the full design strength of the sign post; there is no compromise in sign supporting capability.
A complete range of warning, regulatory and guide signs can be supported, from small signs on single posts to very large signs or sign clusters on multiple posts. Eze-Erect sign posts also work well for construction and temporary signing. Whatever your highway message, Eze-Erect signposts can hold it reliably.
Low Labor Costs/High Salvage Value
When impacted, base posts, signposts and sign panels are often reusable. Even if damaged, sign posts can often be cut into base posts. And more importantly, because of the breakaway action, expensive sign panels, the major cost component of a sign installation are more likely to be reusable.
Hundreds of thousands of Eze-Erect signposts are in use throughout the country. Try this proven system in your area and see how Eze-Erect signposts can save you money.
Retainer-Spacer Strap: 17.125” long X 1.00″ wide x.375″ thick with .375″ offset. The strap is galvanized to ASTM A123
Bolts: Hex head, integral flanged lock nut or standard Grade 9 hex head bolt and lock washer.
Nuts: 5/16″ – 18 UNC hex head, integral flange conforming to ASTM A563, Grade DH. Lock Washers: 3/8” heavy duty external type.
Bolts, Nuts and Lock Washers are cadmium or zinc plated for corrosion resistance.
Warning: This Product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.